DIY PU Imitation Leather Crossbody Bag Making Kits, including PU Leather Fabrics, Zinc Alloy Clasp, Bag Handle, Cord, Needle, Screwdriver, Navajo White, Finished Product: 7x19x15cm

DIY PU Imitation Leather Crossbody Bag Making Kits, including PU Leather Fabrics, Zinc Alloy Clasp, Bag Handle, Cord, Needle, Screwdriver, Navajo White

Size: Finished Product: about 70mm long, 190mm wide, 150mm high;

Rectangle: about 138x190x2mm, hole: 1.6mm, 1pc;

Rectangle: about 53x159x2mm, hole: 1.8mm, 2pcs;

Rectangle: about 101x158x2mm, hole: 1.8mm, 1pc;

Rectangle: about 138x53x2mm, hole: 1.6mm, 4pcs;

Rectangle: about 140x190x2mm, hole: 1.6mm, 1pc;

Rectangle: about 140x191x2mm, hole: 1.6mm, 1pc;

Rectangle: about 168x190x2mm, hole: 1.5mm, 1pc;

Rectangle: about 164x191x2mm, hole: 1.6mm, 1pc;

Screwdriver: about 82x7.5mm, 1pc;

Cord: about 1mm wide, 1 roll;

Needle: 52x3x1mm, hole: 8.5x1mm, 2pcs;

Buckle: about 20x36x6mm, 25.5x8.5mm inner diameter, hole: 2mm, 1pc;

Buckle: about 46x36x16mm, 1pc;

Zipper: about 39x15.5x12mm, 9.5x8mm inner diameter, 2pcs;

Screw: about 8x5mm, pin: 3mm, 4pcs; Nail: 6x2.5mm, 4pcs;

Gasket: about 34x12x0.5mm, hole: 2x7mm, 2pcs;

Bad Handle: about 365x23x18.5mm, clasp: 41x21x7mm and 25x23.5x6.5mm, 1pc;

Bad Handle: about 870x15x6.5mm, clasp: 42.5x21x5.5mm hole: 2.5mm, 1pc.

Priced per 1 Set